The Rode NT4 X/Y is a stereo condenser microphone with two cardioid capsules mounted at 90 degrees. Ideal for location recording, the NT4 has a smooth response over a wide frequency range and is supplied complete with stand mount, windshield and custom stereo cables, which include both XLR and mini-jack connectors for total flexibility. Battery or phantom powered.
The NT4 is an easy to use, precision stereo condenser microphone. Choirs, orchestras, drum over-heads, solo or ensemble instruments, may all be recorded with the 'ambience' and ' space' only a true stereo microphone like the NT4 can capture. The two capsules used in the NT4 measure 1/2 inch in diameter and have a cardioid polar pattern. The cardioid patterns pick-up sound from in front of the microphone and reject sound from the rear. This helps with reducing unwanted sound such as reverberation and audience sound from the rear of the capsules. It is crucial when stereo recording to have the capsules closely matched, as in the NT4.
The polar frequency response of each capsule must be matched because much of the sound in an XY stereo arrangement is picked up off-axis by each capsule. The tone can be varied by rotating the NT4 on its axis, so that the capsules are pointing towards different areas of the sound source. It is recommended that you experiment with subtle position changes to help you achieve your desired results. The matched capsules of the NT4 allow for an accurate response when recording a wide variety of sources in various locations.
| Polar Pattern | Cardioid |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Output Connector | XLR |
Stereo XY condenser microphone
2 x Externally biased 1/2 inch Capsules with gold sputtered diaphragm
Capsules closely matched with full frequency response
Phantom power or 9V battery operation
Durable satin-nickel finish
Surface-mount transformerless circuitry
Complete with WS4 Wind Shield, Custom Carry Case, RM3 Stand Mount plus 3/8" - 5/8" Thread Adaptor, Custom Stereo Cables (dual XLR and mini stereo jack)
Capsule: 2 x 1/2" (13mm) externally polarised condenser transducers in stereo XY placement
Active Electronics: J-FET Impedence convertor with bipolar output buffer
Pickup Pattern: Cardioid per capsule
Output Impedence: 200 Ohms
Frequency Response: 20Hz - 20kHz
Sensitivity: -38dB re 1v/Pa +/-2dB equivalent to 12mV/Pa where 1Pa = 94dBSPL
Equivalent Noise: <16dB SPL (A-Weighted per IEC268-15)
Maximum Output: +13.9dBu @ 1% THD into 1k
Dynamic Range: >128dB
Maximum SPL: 143dB @ 1% THD into 1k
Signal / Noise Ratio: 78dB
Power Requirements: P48, P24, P12 phantom or 9V Battery
Packed Weight: 2.3Kg (Microphone only 480g)
Dimensions: Diameter: 32mm, Length: 232mm
Whether you're seeking specific details about a product, or require advice on how it integrates with your existing setup, we're readily available to assist. Our team of specialists is on hand to help you make an informed decision.
If you're unable to find the information you need on our website, or wish to discuss custom solutions, please feel free to contact us. We provide consultation services designed to assist you in creating an ideal audio environment.
In addition to personalised advice, we also offer quotations for our products and services. If you're planning a project or considering a purchase and have found a better price elsewhere, let us know. We strive to offer competitive rates and will do our best to accommodate your budget. Email us your requirements and we will provide a detailed quote to help you plan your investment with clarity and confidence.
Email us now for tailored advice, bespoke quotations, and solutions that respect your budgetary considerations. sales@giraffeaudio.com
